|Home||» Products||» Temperature Measurement Equipment||» Instrumentation||» Max6T|
MAXWELL6T High Accuracy Smart Temperature Transmitter
6T smart temperature transmitter is high performance product from WNK. It translates the signal of thermal resistor, resistive transducer, thermocouple or voltage sensor into standard signal.
Transmitters adopt specific integrated circuit digital technology to achieve the best consistency of accuracy and signal. Every transmitter has done with ambient temperature compensation before shipping, to ensure transmitters highest accuracy and mini drift in wide working temperature range.
Our transmitters are easy for on-site installation, they can be integrally installed with temperature sensor, or installed away from sensor. The solid housing is with global universal wire connector, and the aluminum shell of double chamber structure ensures transmitter regular working in dangerous occasions.
Excellent Performance and Reliability
1. Digital accuracy+-0.01, Pt100 thermal resistor input
2. 24 bit analog-digital converter with ambient temperature compensation, the measurement performance is outstanding in the whole working range
3. Transmitter-sensor matching characteristic is easy to use, it can reduce the interchange error of thermal resistor sensor, and improve measurement accuracy up to 75%
4. Double chamber shell, which makes the transmitter have excellent reliability in high temperature, corrosive and radio frequency interference
5. Integrated transient protector, can prevent the transmitter from the damage caused by transient current of a circuit
6. Correction of electric potential of thermal resistance-check and eliminate the deviation of electric potential. This error is caused by a small voltage signal when the thermal resistance measures
7. Independent parallel alarm circuit, which can provide an independent, backup alarm output when the circuit board or software fails
8. Self-calibration: by comparing the dynamic measurement with the very stable and accurate internal reference, the analog -digital converter circuit automatically makes self calibration for each update temperature.
1. Factory set the output mode according to user requirements, so that the installation is convenient
2. Integrated LCD Meter
3. Special sensor input capability, the user can input a special sensor parameters into transmitter, adjust the temperature curve of the transmitter
4. HART protocol transmitter can be used with the Hart hand operator, AMS equipment management system or the use of HART protocol system for digital communications
5. Profibus-PA bus protocol transmitter can communicate with PDM, FDT, AMS equipment management system for communication and equipment management
6. FF bus protocol transmitter can be used with AMS, FDT equipment management system for communication and equipment management.
AUTOMAC ENGINEERS All Rights Reserved.