| Unit of Measure | Kilograms/Kilograms |
| Thickness | 3.0 mm |
| Surface Treatment | Hot Dipped Galvanized |
| Torque | Not applicable to nails |
| Corrosion Resistant | Yes |
| Shape | Ring Shank |
| Finish | Zinc Coated |
| Grade | AISI 1018 or equivalent |
| Application | Wood Framing, Decking, General Construction |
| Diameter | 3.0 mm (0.148 in) |
| Drive Type | Pneumatic or Manual |
| Head Type | Full Round Head |
| Thread Type | Ring Shank |
| Material | Carbon Steel |
| Hardness | HRC 50-55 |
| Capacity | Suitable for most pneumatic nailers |
| Feature | High holding power, Anti-pullout resistance |
| Fasteners Type | Framing Nails |
| Load Capacity | Dependent on application (consult design requirements) |
| Standard | ASTM F1667 |
| Tolerance | 0.05 mm |
| Tensile Strength | 800 MPa minimum |